◀ Prev • Parts • Full

It's important to make sure that your chosen frequency and bandwidth won't interfere with other users of the radio frequency spectrum, such as MeshCore, Meshtastic and LoRaWAN. To do so, calculate the lower and upper ends of the slice of the spectrum used by each (in your area) and make sure they don't overlap. The frequency is the center of the slice of the spectrum and the bandwidth is the total width of the slice. To get the lower value, you simply substract half the bandwidth from the center frequency, and to get the upper value you add half the bandwidth to the center frequency.

Note: Radio frequency spectrum is a legally controlled resource, and legislation varies widely around the world. It is your responsibility to be aware of any relevant regulation for your location, and to make decisions accordingly.cite-ref-2[2]

• Popular RNode settings

cite-note-0-11. ↑ https://unsigned.io/understanding-lora-parameters/ (CC BY-NC-SA 4.0)

cite-note-22. ↑ https://reticulum.network/manual/interfaces.html#rnode-lora-interface

• LoRa Bitrate & Sensitivity Calculator

◀ Prev • Parts • Full